1.6 Mechanical Properties, Wear and Corrosioin

How a material's characteristics an shape affect stiffiness, elasticity and strength

0.0 (0)

Cedric Bühler

Set of flashcards Details

Flashcards	15
Language	Deutsch
Category	Medical
Level	Primary School
Created / Updated	04.02.2013 / 05.07.2019
Weblink	https://card2brain.ch/box/1_6_mechanical_properties_wear_and_corrosioin
Embed	<iframe src="https://card2brain.ch/box/1_6_mechanical_properties_wear_and_corrosioin/embed" width="780" height="150" scrolling="no" frameborder="0"></iframe>

Card list

When is a material said to behave elastically?

Keyboard commands:

= turn,

= for-/backward,

= scroll

if after being deformed by a load, it returns to its original shape when unloaded

When is a material said to behave plastically

Keyboard commands:

= turn,

= for-/backward,

= scroll

if after being deformed it does not return to its origianl shape

Define elastic limit.

Keyboard commands:

= turn,

= for-/backward,

= scroll

If a material has been stressed to such an extent that it will not return to its original shape and dimension upon removal of the load, then it is said to have exceeded its elastic limit - this is alsno known as plastic deformation

Do a sphere and a cube of the same material have the same elastic modulus?

Keyboard commands:

= turn,

= for-/backward,

= scroll

Yes:

the stress/strain ration does not change. This ration, therefore, is dependent on the material and not on the shape of the structure

Which scientist is associated with elastic modulus?

Keyboard commands:

= turn,

= for-/backward,

= scroll

Thomas Young

denoted by the letter E. It is constant for each material and is thus a measure of the material's ability to maintain shape under external loads.

Stress = load / cross-sectional area

Strain = change in length / origina length

Modulus = Stress / Strain

Two bars of the same material 500mm in length have diameters of 5mm and 7mm respectively.

Which is the easier to bend?

5mm

7mm

Keyboard commands:

= turn,

= for-/backward,

= scroll

5mm

7mm

Calculate the "I" value for a beam of 35mm in length.

5mm depth and 15mm width.

Is it easier to bend than a beam of the same length with a width of 10mm and depth of 8mm?

Keyboard commands:

= turn,

= for-/backward,

= scroll

Yes

I1 = (15mm * (5mm)³) / 12 = 156

I2 = (10mm * (8mm)³) / 12 = 426

Define tribology.

Keyboard commands:

= turn,

= for-/backward,

= scroll

Tribology is the study of friction, lubrication and wear

Explain three-body wear.

Keyboard commands:

= turn,

= for-/backward,

= scroll

This is a form of abrasive wear and is caused when a hard partickle or third body becomes trapped between two articalting surfaces.

It can dramtically increse the normal rate of wear of these surfaces.

What type of loading can lead to fatigue war?

Keyboard commands:

= turn,

= for-/backward,

= scroll

occurs after a large number of loading cycles, even though the load is less than that expected to prodce failure in a single load application

When is galvanic corrosion likely to occour?

When two dissimilar metals are touching or in close proximity in a conductive environment or electrolyte

In order for crevice corrosion to be initiated, two dissimilar metals must be present (True / False?).

False:

There is no need for two dissimilar metals to be present to initiate it.

The small relative motion between two touching surfaces is called.

Fretting

is a form of wear which is the result of small relative motion between two touching surfaces which produce depris.

Give another name for creep.

cold-flow

Which factor has the greatest effect on the rate of creep?

Temperature has a pfofound effect on creep.

1 / 15

Card list

Study

1.6 Mechanical Properties, Wear and Corrosioin

Create or copy sets of flashcards

Create or copy sets of flashcards

Log in to see all the cards.

SWITCHaai

Office 365

Edulog

Apple ID

Google