PPL(A) PL020 - General Knowledge

In which part of the engine the anti-icer is installed:

In the low-pressure fuel injection engine the fuel blend is produced in the:

In the air-cooled engine the most ribbed are the regions of:

 In the air-cooled engine, a considerable amount of heat is also carried away through:

In the carburettor engine the fuel blend is produced through:

In the high pressure fuel injection engine the fuel blend is produced in the: 

The camshaft is directly coupled with:

The value of the single-phase AC voltage:

The value of three- phase AC:

The validity of the certificate of airworthiness of the aircraft:

Proper Transponder work is signaled by:

The apparatus called gyroscopic turn indicator shows:

Choosing communications between aircrafts, between the ground services, between members of the crew and interception of radio navigation is done:

Aileron deflection at the asymetric wing profile (differential deflection):

Which backup power source resumes when the DC generator fails:

It is prohibited to switch on the transponder with the set:

The task of reducing the friction and wear of the engine components is carried by:

The task of the propeller is the exchange of the :

The scope and powers to provide technical services by the pilot before performing the flight by him on the aircraft:

The scope of work of the radio altimeter is:

The turn indicator, a gyroscopic device is characterized by the fact that it:

Ignition of the fuel blend in a four-stroke engine takes place between:

The main fuel feed pump is driven:

Hydraulic accumulator (hydroaccumulator):

Mark the altering current (AC) sources:

Mark the direct current (D.C.) sources:

Too little valve clearance can cause:

With the increase of the engine speed the torque:

With the increase of the compression ratio the used fuel should be:

A set of communications equipment consists of:

Cavitation effect influences the fuel system: 

Carburettor icing phenomenon usually occurs under the conditions of high humidity and ambient temperature of (?C):

Unit fuel consumption while leaning the fuel mixture:

The distance gyromagnetic compass is designed to: