study
What field content is used by ICMPv6 to determine that a packet has expired?
A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet?
What is indicated by a successful ping to the ::1 IPv6 address?
What is the purpose of ICMP messages?
Which two things can be determined by using the ping command? (Choose two.)
Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host?
An administrator wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured?
What are three parts of an IPv6 global unicast address? (Choose three.)
What are two types of IPv6 unicast addresses? (Choose two.)
What type of address is automatically assigned to an interface when IPv6 is enabled on that interface?
Which of these addresses is the shortest abbreviation for the IP address:
3FFE : 1044 : 0000 : 0000 : 00AB : 0000 : 0000 : 0057?
Missing False Answer:
- 3FFE : 1044 : 0000 : 0000 : 00AB :: 0057
Which two IPv4 to IPv6 transition techniques manage the interconnection of IPv6 domains? (Choose two.)
Which three IP addresses are private ? (Choose three.)
Missing False Answer:
- 192.167.10.10
What are three characteristics of multicast transmission? (Choose three.)
Missing False Answer:
- Multicast messages map lower layer addresses to upper layer addresses.
A message is sent to all hosts on a remote network. Which type of message is it?
What subnet mask is represented by the slash notation /20?
What is the purpose of the subnet mask in conjunction with an IP address?
What does the IP address 172.17.4.250/24 represent?
Which two parts are components of an IPv4 address? (Choose two.)
Missing False Answer:
- broadcast portion
How many bits are in an IPv4 address?
Match the definitions to their respective CLI hot keys and shortcuts. (Not all options are used.)
An administrator is configuring a switch console port with a password. In what order will the administrator travel through the IOS modes of operation in order to reach the mode in which the configuration commands will be entered? (Not all options are used.)
Refer to the exhibit. What three facts can be determined from the viewable output of the show ip interface brief command? (Choose three.)
Refer to the exhibit. A network technician is testing connectivity in a new network. Based on the test results shown in the exhibit, which device does the technician have connectivity with and which device does the technician not have connectivity with? (Choose two.)
What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC?
A technician is adding a new PC to a LAN. After unpacking the components and making all the connections, the technician starts the PC. After the OS loads, the technician opens a browser, and verifies that the PC can reach the Internet. Why was the PC able to connect to the network with no additional configuration?
What command can be used on a Windows PC to see the IP configuration of that computer?
Why would a Layer 2 switch need an IP address?
Which interface is the default SVI on a Cisco switch?
Which interface allows remote management of a Layer 2 switch?
What are two characteristics of RAM on a Cisco device? (Choose two.)
Which statement is true about the running configuration file in a Cisco IOS device?
While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The changes did not solve the problem and were not saved. What action can the technician take to discard the changes and work with the file in NVRAM?
Refer to the exhibit. A network administrator is configuring the MOTD on switch SW1. What is the purpose of this command?
How does the service password-encryption command enhance password security on Cisco routers and switches?
Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.)
Why is it important to configure a hostname on a device?
Which information does the show startup-config command display??
Which two functions are provided to users by the context-sensitive help feature of the Cisco IOS CLI? (Choose two.)
A router has a valid operating system and a configuration file stored in NVRAM. The configuration file contains an enable secret password but no console password. When the router boots up, which mode will display?
-
- 1 / 135
-
Flashcards
Match the definitions to their respective CLI hot keys and shortcuts. (Not all options are used.)
An administrator is configuring a switch console port with a password. In what order will the administrator travel through the IOS modes of operation in order to reach the mode in which the configuration commands will be entered? (Not all options are used.)
Refer to the exhibit. What three facts can be determined from the viewable output of the show ip interface brief command? (Choose three.)
Refer to the exhibit. A network technician is testing connectivity in a new network. Based on the test results shown in the exhibit, which device does the technician have connectivity with and which device does the technician not have connectivity with? (Choose two.)
What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC?
A technician is adding a new PC to a LAN. After unpacking the components and making all the connections, the technician starts the PC. After the OS loads, the technician opens a browser, and verifies that the PC can reach the Internet. Why was the PC able to connect to the network with no additional configuration?
What command can be used on a Windows PC to see the IP configuration of that computer?
Why would a Layer 2 switch need an IP address?
Which interface is the default SVI on a Cisco switch?
Which interface allows remote management of a Layer 2 switch?
What are two characteristics of RAM on a Cisco device? (Choose two.)
Which statement is true about the running configuration file in a Cisco IOS device?
While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The changes did not solve the problem and were not saved. What action can the technician take to discard the changes and work with the file in NVRAM?
Refer to the exhibit. A network administrator is configuring the MOTD on switch SW1. What is the purpose of this command?
How does the service password-encryption command enhance password security on Cisco routers and switches?
Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.)
Why is it important to configure a hostname on a device?
Which information does the show startup-config command display??
Which two functions are provided to users by the context-sensitive help feature of the Cisco IOS CLI? (Choose two.)
A router has a valid operating system and a configuration file stored in NVRAM. The configuration file contains an enable secret password but no console password. When the router boots up, which mode will display?
Which command or key combination allows a user to return to the previous level in the command hierarchy?
Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment?
A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a switch to manage it. Which access method should be chosen?
What is the function of the kernel of an operating software?
Match the description to the organization. (Not all options are used.)
Match the protocol function to the description while taking into consideration that a network client is visiting a web site. (Not all options are used.)
Match each description to its corresponding term. (Not all options are used.)
Which characteristic describes the default gateway of a host computer?
What will happen if the default gateway address is incorrectly configured on a host?
Which address does a NIC use when deciding whether to accept a frame?
Refer to the exhibit. HostA is attempting to contact ServerB. Which two statements correctly describe the addressing that HostA will generate in the process? (Choose two.)
False Answer Missing:
- A frame with the destination MAC address of ServerB.
Which PDU is processed when a host computer is de-encapsulating a message at the transport layer of the TCP/IP model?
Which PDU format is used when bits are received from the network medium by the NIC of a host?
At which layer of the OSI model would a logical address be encapsulated?
Which three layers of the OSI model are comparable in function to the application layer of the TCP/IP model? (Choose three.)
Flase Answer Missing:
- physical
- network
Refer to the exhibit. If Host1 were to transfer a file to the server, what layers of the TCP/IP model would be used?
False Answer Missing:
- application, session, transport, network, data link, and physical layers
What is an advantage of network devices using open standard protocols?
What are proprietary protocols?
What three application layer protocols are part of the TCP/IP protocol suite? (Choose three.)
Answer: PPP is missing (false)
What is an advantage of using standards to develop and implement protocols?
