Sprechfunk-Fragen

1.1 Select the correct definition for "estimated time of arrival" in respect to IFR flights.

1.2 What does the term "aeronautical station" mean?

1.3  What does the term "blind transmission" mean?

1.4  What does the term "broadcast" mean?

1.5  What does the term "air-ground communication" mean?

1.11  What does the abbreviation "INS" mean?

1.14  What does the abbreviation "SELCAL" mean?

1.15  What does the abbreviation "SSR" mean?

1.16  What does the abbreviation "RNAV" mean?

1.20  If you are requested to report your height, to which Q-code setting would you refer?

1.21  If you are requested to report your altitude, to which Q-code setting would you refer?

1.24  What is the Q-code for "magnetic bearing to the station"?

1.25  What does "QTE" mean?

1.26  What is the Q-code for "true bearing from the station"?

1.33  The transition level is determined on the basis of ...

1.34  The vertical dimension of the transition layer must be at least:

1.36   Which are the units of measurement used in flight operation for wind and velocity (except for take-off and landing)?

1.37  Which are the units of measurement used in flight operation for wind and velocity for take-off and landing?

1.38  Which time will be issued by ATC, if an arriving aircraft on an IFR flight has to hold over the navigational aid serving as clearance limit, when holding of more than 20 minutes is expected? The ...

1.39  What does "friction coefficient 45" in a runway report mean?

1.40  What does "friction coefficient 20" in a runway report mean?

1.41  The published transition altutude is 5000ft, the present QNH is  1005 hPa. What is the transition level?

1.42  The published transition altitude is 5000 ft, the present QNH is 1015 hPa. What is the transition level?

1.43  The published transition altitude is 5000 ft, the present QNH is 977 hPa. What is the transition level?

1.44  An aircraft on an IFR flight at FL 100 approaches an aerodrome for landing. The QNH given is 1018 hPa; the transition altitude is 5000 ft. When shall the pilot change the altimeter setting to QNH? When...

1.45  The pilot of an arriving IFR flight shall change altimeter setting from 1013,2 hPa to QNH during the descent...

1.46  The pilot of a departing IFR flight shall change altimeter setting from QNH to standard altimeter setting 1013,2 hPa when...

2.1  An ATC unit is providing...

2.2  Air traffic control will be provided to ...

2.3  Name the three basic ATC units:

3.9  Which is the maximum distance at which you might espect solid VHF contact over flat terrain at flight level 100?

3.10  In order to conduct an IFR flight "At FL 200" the aircraft must be equipped with ...

3.11  An IFR flight intending to conduct an instrument approach has to be equipped with LLZ-, GP- and Marker beacon receiver ...

4.1  An IFR flight without DME interrogator may be operated...

4.2  Within how many miles radius around a specified navigational aid does the minimum sector altitude provide 1000 ft obstacle clearance?

4.3 The IFR minimum on ATC routes is expressed in ...

4.4  Altitude information of route segments on German enroute charts indicate the ...

4.5  What is the minimum vertical separation to other IFR flights above FL 290?

4.6  What is the minimum vertical separation to other IFR flights below FL 410?

4.7  The terminology associated with the standard holding pattern is as follows: