card2brain.ch

9. Question OK

Category: Module 03: Veeam ONE Features and Functionality

Are you forced to add VMware or Microsoft virtual infrastructure during Veeam ONE installation?

(select one)

Yes, but you are only forced if you have already installed Veeam Managment Pack

Yes adding virtual infrastructure during setup is required

No, it is possible to skip adding virtual infrastructure during setup

Yes, but you are only forced if you have already installed Veeam Enterprise Manager

Yes, but you are only forced if you are installing Veeam One as an advanced deployment

10. Question OK

Category: Module 03: Veeam ONE Features and Functionality

Which deployment scenarios exist for Veeam ONE? (select two)

Typical

Virtual Machine(s)

Physical machine(s)

Advanced

Server/Client

11. Question OK

Category: Module 03: Veeam ONE Features and Functionality

Which of these statements regarding Veeam ONE Custom Alerts are true? (select three)

Custom Alerts support rule condition: Resource usage is out of allowed range

Custom Alerts support Trigger type: Rule for specific conditions or state

Custom Alerts support Trigger type: Event based rules

Custom Alerts support rule condition: VMware VM tools out of date

Custom Alerts support rule condition: Snapshot size for VM is inside allowed range

12. Question OK ?

Category: Module 04: Deployment

Using Hyper-V offhost proxy has the following requirements? (select three)

Reference: http://helpcenter.veeam.com/backup/80/hyperv/offhost_backup_proxy.html

Offhost Proxy must have Vss hardware provider installed. This VSS hardware provider is supplied by Veeam limiting it to specific vendors

Offhost Proxy must have Hyper-V role enabeled

Offhost Proxy must have VSS hardware provider installated. This VSS hardware provider is supplied by storage vendor

Offhost Proxy must have accsess to share storage

Shared storage must be HP Store Virtual. HP Store Virtual VSA or HP StoreServ (3PAR)

13. Question

Category: Module 04: Deployment

Which statements about Parallel Processing are true? (select two)

Reference: http://helpcenter.veeam.com/backup/80/vsphere/

http://helpcenter.veeam.com/backup/70/bp_vsphere/parallel_example.html

http://helpcenter.veeam.com/backup/80/vsphere/

Parallel Processing ist default limited to four virtuel drives per job

Parallel processing is not an option. It is ALWAYS enabled!

Each data processing task within a job requires one CPU

Parallel Processing can be disabeld per Job

Parallel Processing is by default limited to four snapshots per datastore

14. Question OK

Category: Module 04: Deployment

Which of these statements are true about Veeam Explorer for Sharepoint? (select three)

Reference: http://www.scribd.com/doc/186066578/Veeam-Backup-7-Userguide-Vmware#scribd

Remote BLOB stores are fully supported.

The staging Microsoft SQL Server must run on the machine where Veeam Explorer for Sharepoint is installed.

Remote BLOB stores are not supported.

Remote BLOB stores created with Microsoft Sharepoint Server 2010 (Foundation, Server and Enterprise editions) are supported, if virtualized on VMware or Hyper-V platform.

It is possible to use the Microsoft SQL Server Express shipping with Veeam Backup & Replication as a staging server.

15. Question OK

Category: Module 04: Deployment

Which previous versions are supported when upgrading directly to Veeam Backup & Replication version 8? (select two)

http://helpcenter.veeam.com/backup/80/vsphere/upgrade_vbr.html

6.5

7.0

6.1

5.0

6.2

16. Question

Category: Module 04: Deployment

Which hypervisors are supported in Veeam Backup & Replication? (select two)

http://www.veeam.com/de/system-requirements.html

VMware ESX(i) 4.0

VMware ESX(i) 3.5

Citrix XenServer 6.0 or later

Free VMware ESXi 5.0 or later

Free Microsoft Hyper-V 2008 R2 SP1 or later

17. Question OK

Category: Module 05: Initial Configuration

Which statements regarding initial configuration are true? (select two)

VMware Backup Proxy has Encrypt LAN traffic in network mode enabled by default.

SMBv3 clusters are supported - Standalone SMBv3 servers are not supported.

Managed Linux servers must have SSH and Perl installed.

Microsoft Windows based backup repository implements vPower NFS server

Linux based backup repository implements vPower NFS server

18. Question OK

Category: Module 05: Initial Configuration

Which of these statements regarding initial configuration are true? (selcet two)

When deploying a backup proxy it is recommended to use as many concurrent tasks as server resources and backup target can handle.

It is possible to limit only write throughput (ingestion rate) on a backup repository.

It is possible to limit only read throughput (egestion rate) on a backup repository.

VMware vCloud Director 1.5 or later are supported when adding a managed server.

Microsoft Hyper-V 2008 or later are supported when adding a managed server.

19. Question

Category: Module 05: Initial Configuration

Are credentials included in configuration backups?

(select one)

Yes, but passwords are never saved. oder Yes, but only username(s) are saved.

Yes, both username(s) and password(s) are always included.

Yes, both username(s) and password(s) - but only if restored to same machine.

Yes, but it is optional to include password(s).

No, credentials are never included.

20. Question OK

Category: Module 05: Initial Configuration

Which are supported replication targets? (select three)

VMware vCloud Director

VMware vCenter server

VMware ESX(i) standalone host

Microsoft Hyper-V standalone host

Amazon EC2

21. Question OK

Category: Module 05: Initial Configuration

Which can be added as Backup Repositories? (select three)

Reference: http://helpcenter.veeam.com/backup/80/vsphere/repository_type.html

NFS

Linux Server

SMBv3

Microsoft Windows Server

CIFS

22. Question OK

Category: Module 06: Protect

Which statements regarding backup jobs are true? (select two)

Incremental backups always required to configure either synthetic full or active full bakups

By default, Veeam Backup & Replication performs the backup in the forever incremental backup mode

Backup jobs offer three different backup modes.

By default, Veeam Backup & Replication performs the backup in the reversed incremental backup mode

It is possible to configure both secondary and tertiary destination for backup jobs.

23. Question OK

Category: Module 06: Protect

Which statements are true regarding Hyper-V Change Block Tracking? (select two)

http://helpcenter.veeam.com/backup/80/hyperv/changed_block_tracking.html

Information on data blocks that have changed is registered in special .ctp files

Information on data blocks that have changed is registered in special .ctk files

The Veeam CBT driver is activated on a Hyper-V when the host is first addressed by a job with enabled CBT.

The Veeam CBT driver is installed and activated on a Hyper-V when the host is first addressed by a job with enabled CBT.

The Veeam CBT driver is installed and activated on every Hyper-V host that is added to the list of managed server.

24. Question OK

Category: Module 06: Protect

Is Veeam Backup & Replication able to backup multiple VMs at once using VeeamZIP? (select one)

Yes, in all paid editions.

Yes, this is possible in all editions.

Yes, but only in Enterprise Plus edition.

No, it is never possible to backup multiple VMs at once using VeeamZIP.

Yes, but only in Enterprise or Enterprise Plus editions.

25. Question OK

Category: Module 06: Protect

Which compression level is used by VeeamZIP?

(select one)

Reference: http://helpcenter.veeam.com/backup/80/free/vmware_performing_backup.html

Always extreme

Always High

Always Optimal

No compression is used

Compression is optional

26. Question

Category: Module 06: Protect

Which of these statements regarding Backup Jobs are true? (select two)

Reference: http://www.veeam.com/kb1522

Veeam offers a free hosted SMTP server to send out e-mail notifications

If a new VM is added to a VM container after a backup job is created, the job will automatically be updated to include the added VM.

During every job run, Veeam Backup & Replication checks disk space on the destination storage.

It is not possible to define VM backup order.

It is possible to manually start and complete backup job outside backup window.

27. Question OK

Category: Module 07: Verification

Which statements are true regarding SureReplica compared to SureBackup? (select two)

On-Demand Sandbox operations are faster

Replication job can be performed while SureReplica job is running.

SureReplica does not require the vPower engine

SureReplica offers more verification tests

SureReplica is available for both Microsoft Hyper-V and VMware vSphere

28. Question OK

Category: Module 07: Verification

Which are valid virtual lab configurations for both Microsoft Hyper-V and VMware vSphere? (select two)

Enterprise Multi-Host

Basic Single-Host

Advanced Single-Host

Advanced Multi-Host

Basic Multi-Host

29. Question OK

Category: Module 07: Verification

Which of these statements regarding Application Groups are true? (select two)

http://helpcenter.veeam.com/backup/80/vsphere/application_group.html

VMs added must belong to the same platform (Microsoft Hyper-V or VMware vSphere)

VMs can mixed from both Microsoft Hyper-V and VMware vSphere

The application group creates the "surroundings" for the verified VM(s). VM(s) inside application group are not tested/verified.

The application group creates the "surroundings" for the verified VM(s).

Heartbeat/Ping/Script tests can be performed against ANY guest operating system.

30. Question OK

Category: Module 07: Verification

Which statements are true regarding vPower for VMware vSphere? (select three)

http://helpcenter.veeam.com/backup/80/vsphere/vpower_nfs_service.html

vPower is used to recover files from tape.

vPower is used to enable SureBackup recovery verification.

vPower always uses NFS to mount VM(s) from a Backup Repository.

vPower is not supported for non-ESXi version of VMware vSphere.

vPower is used to enable Instant VM Recovery.

31. Question OK

Category: Module 07: Verification

With which version(s) is it possible to perform backup recovery verification? (selct one)

http://helpcenter.veeam.com/backup/80/vsphere/surebackup_manual.html

Standard

Free

Enterprise Plus

All editions

Eneterprise and Enterprise Plus

32. Question OK

Category: Module 08: Disaster Recovery

Which statements are true regarding the Extract utility? (select two)

The extract utility always restores a VM from the newest restore point.

The extract utility is available as a GUI and command line version for many operating systems.

The GUI version of extract utility is only available for Microsoft Windows.

The command line version of extract utility is only available for Microsoft Windows.

The extract utility always restores a VM from the full backup file.

33. Question OK

Category: Module 08: Disaster Recovery

Which statements are true regarding Full VM restores? (select three)

http://helpcenter.veeam.com/backup/80/vsphere/

Restoring to the original location mitigates the risk of operator's errors.

Restoring to the original location the primary VM is automatically deleted before restore.

Physical backup proxies provide multiple transport modes.

Using a VM as backup proxy with HotAdd access to the source datastore reduces load on the network.

Direct SAN access is the fastest.

34. Question OK

Category: Module 08: Disaster Recovery

Where is the Extract utility command line version for Linux located? (select one)

It is available upon request - open a support case.

All major Linux distributions include an Extract utility compatible with Veeam Backup & Replication backup files.

There is no Linux version of the Extract utility.

%PROGRAMFILES%\Veeam\Backup and Replication\Backup

It is a separate download from http://www.veeam.com/downloads

35. Question OK

Category: Module 08: Disaster Recovery

Which of these statements regarding Replica failover/failback are true? (select two)

After committing failback, the failback protective snapshot that saves the pre-failback state of a VM replica is deleted.

After committing failback, replication activities for the VM which you failed back are NOT resumed automatically.

When you undo failover, the VM replica is reverted to its pre-failover state, powered off and all changes that have taken place since the VM replica was powered on are deleted.

After undoing failover has completed, you will need to reconfigure the replica job before it will start again.

It is only possible to failover one VM at a time.

36. Question OK

Category: Module 09: Restore Objects

Which of the following statements are true regarding Veeam Explorer for Exchange? (select one)

http://helpcenter.veeam.com/backup/80/explorers/index.html?working_with_vex.html

Veeam Explorer for Exchange is only available for paid editions.

When you run the Exchange Items Restore wizard on a VM backed up using VSS, the ese.dll file is added automatically

Veeam Explorer for Exchange supports Microsoft Exchange 2007, 2010 and 2013.

The Extensible Storage Engine DLL file can be found on the Microsoft Exchange Server distribution CD at X:\Setup\ServerRoles\Bin\ese.dll

Veeam Explorer for Exchange requires a special dynamic link library - ese.dll - otherwise it can only export folders/items to .PST files.

37. Question OK

Category: Module 09: Restore Objects

Veeam Backup & Replication provides File-Level recovery for any file system? (select one)

No, this is not supported.

Yes, but it requires manual work

Yes, but a support case will have to be opened.

Yes, but you need to install 3rd party tool Portlock Explorer.

Yes, all file systems are fully supported.

38. Question OK

Category: Module 09: Restore Objects (Data Recovery)

Which statements regarding Guest OS File Recovery are true? (select two)

http://helpcenter.veeam.com/backup/80/vsphere/

MultiOS file-level recovery allows reading data from 18 different file systems

For FAT, NTFS and ReFS the built-in file-level restore functionality is used.

MultiOS file-level recovery allows reading data from ReiserFS, JFS, JFFS2 and XFS

When performing recovery directly to a Linux host, you can recover files with correct permissions.

When performing recovery through the FTP server, you can recover files with correct permissions.

39. Question OK

Category: Module 09: Restore Objects

Which are valid Restore Options in the Restore Wizard? (select three)

Guest files (Linux)

Instant VM Recovery

Entire VM (excluding registration)

Application Items

VM hard disks

40. Question OK

Category: Module 09: Restore Objects

Which of the following statements regarding Veeam Explorer for Sharepoint are true? (select three)

Veeam Explorer for Sharepoint does not support Microsoft SharePoint Server Foundation editions - only Standard and Enterprise. /Veeam Explorer for SharePoint is able to restore Microsoft SharePoint items by using PowerShell cmdlets

The staging system must run the same or a later version of Microsoft SQL Server as the server that hosts restored Microsoft SharePoint content databases

The account used for working with Veeam Explorer for SharePoint requires membership in the sysadmin fixed server role on the staging Microsoft SQL Server.

The staging Microsoft SQL Server must run on the machine where Veeam Explorer for SharePoint is installed (that is, on the machine running Veeam Backup server).

Veeam Explorer for Sharepoint is able to Restore to original location in all paid editions.

41. Question OK

Category: Module 10: Advanced Data Protection

Which statements regarding Veeam Backup & Replication’s WAN Acceleration are true? (select two)

Only Backup Copy jobs can use WAN acceleration

Veeam recommends high capacity NL-SAS drives for WAN acceleration cache.

All job types can use WAN acceleration

Only Backup Copy and Replica jobs can use WAN acceleration

Veeam recommends SSD drives for WAN acceleration cache.

42. Question OK

Category: Module 10: Advanced Data Protection

Which statements are true regarding Backup from Storage Snapshots? (select two)

HP StoreServ is only supported from firmware 3.1.2 and up.

Only HP StoreVirtual, HP StoreServ and NetApp is currently supported.

Only HP StoreVirtual, HP StoreServ and Nimble Storage are currently supported.

HP StoreVirtual requires a Virtual Copy license to enable storage snapshot functionality

HP StoreServ requires a Virtual Copy license to enable storage snapshot functionality

43. Question OK

Category: Module 10: Advanced Data Protection

Which of these statements regarding Veeam Backup & Replications Powershell Snap-in are true? (select two)

A PowerShell script could be run as a post-job activity.

The PowerShell Snap-In is installed by default.

The PowerShell Snap-In is available for all editions.

To see a list of available commands use: Get-VBRCommands

The PowerShell Snap-In is an optional component.

44. Question OK

Category: Module 10: Advanced Data Protection

Which statement regarding Enterprise Manager is true? (select one)

Users with Portal User role can access VMs from their restore scope in VMs and/or Files tab and generate reports as permitted by their settings.

Restore scope can be customized if you have Enterprise Edition.

Users with Restore Operator role can access VMs from their restore scope in VMs and/or Files tab, as well as reports for these VMs; they can also perform restore operations as permitted by their settings. permitted by their settings.

Only XML format is currently supported for RESTful API for resource representation.

RESTful API is an optional feature.

45. Question OK

Category: Module 10: Advanced Data Protection

Which statements regarding Veeam Backup & Replication tape support are true? (select tree)

It is not possible to recover individual files/folders from tape.

It is possible to recover individual files/folders from tape.

The MTF (Microsoft Tape Format) industry format is used to write date to tape.

Restoring a VM from tape requires first restoring the entire backup job to disk.

The VTF (Veeam Tape Format) proprietary format is used to write date to tape.

46. Question OK

Category: Module 11: Product Editions

Which statements regarding various product features are true? (select three)

You can clone existing jobs and edit their settings from Enterprise Manager web UI

All editions (incl. free edition) offers tape functionality

Standard Edition allows browsing and searching for files in both current and archived backups (moved to tape)

1-Click-Restore is used in Backup Browser and Veeam Explorers to allow restore to original location.

1-Click-Restore is used in Enterprise Manager

47. Question OK

Category: Module 11: Product Editions

Which statements regarding various product features are true? (select two)

All editions offer task automation.

All paid editions offer scheduled incremental backup jobs of vCloud Director VM(s).

Universal Application-Item Recovery is only available in Enterprise and Enterprise Plus.

Backup Copy job to remote location over WAN is only supported in Enterprise Plus

All editions are installed with the same setup file.

48. Question OK

Category: Module 11: Product Editions

Which statement regarding various product features are true ? (select one)

Veeam Explorer for Sharepoint in Standard Edition only provides limited restore support from Microsoft Hyper-V VMs.

It is possible to switch a paid edition to free edition by going to View > Free functionality only from the menu.

Backups from Hyper-V will never use storage snapshots - only VM snapshots.

Veeam Explorer for Sharepoint in Standard Edition provides full restore support from VMware vSphere VMs.

Enterprise Plus edition includes WAN acceleration which can be used for Backup Copy Jobs and Replication Jobs across the WAN.

Veeam VMCE_V8

Cartes-fiches

Veeam VMCE_V8

Créer ou copier des fichiers d'apprentissage

Cartes-fiches

Veuillez vous connecter

Google

Apple ID

Microsoft

Switch edu-ID

Edulog

Google

Apple ID

Microsoft

Switch edu-ID

Edulog