Informationssystem

1. Semester Fachhochschule Luzern - Prüfungsvorbereitung CCNA

1. Semester Fachhochschule Luzern - Prüfungsvorbereitung CCNA

Rupan Sivarajaiyar
Lernen

Rupan Sivarajaiyar
Diese Lernkarten bieten einen umfassenden Überblick über die Grundlagen von Informationssystemen auf Universitätsniveau. Sie decken Themen wie Netzwerkadressen, Routerkonfigurationen, TCP/IP-Protokolle, und Sicherheitsmaßnahmen ab. Techniker und Netzwerkadministratoren profitieren von diesen Karteikarten, da sie praktische Anwendungen und Problembehebungen in verschiedenen Netzwerkszenarien vermitteln. Die Inhalte umfassen auch die Verwendung von Befehlen zur Fehlerbehebung und die Konfiguration von Netzwerkgeräten, was sie zu einem wertvollen Werkzeug für die Vorbereitung auf Prüfungen und die tägliche Arbeit macht.
Karten
144
Lernende
17
Sprache
Deutsch
Kategorie
Informatik
Stufe
Universität
Erstellt / Aktualisiert
14.06.2012 / 21.04.2020

Lernkarten

Which service is used when the nslookup command is issued on a computer?

Refer to the exhibit. A network technician creates equal-sized subnets of network 192.168.2.0/24 using the subnet mask 255.255.255.224. If the technician wishes to calculate the number of host addresses in each subnet by using the formula that is show

What are the default terminal emulation software settings when configuring a Cisco device through a console port?

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

In a packet-switched data network, what is used to reassemble the packets in the correct order at the destination device?

Refer to the exhibit. A network administrator tries to test the connectivity between routers R1 and R2, but the attempt to ping is unsuccessful. Based on the show ip interface brief command outputs, what could be the possible cause of the problem?

Which router configuration mode will require user authentication if an administrator issues the enable secret command?

Which location of router memory is cleared with the erase startup-config command?

Which subnet mask should be used for a Class B network that is divided into subnets and will accommodate between 800 hosts and 1000 hosts?

Which two programs can be used to accomplish terminal emulation for configuring a router from the CLI through the console port? (Choose two.)

Refer to the exhibit. The network containing router B is experiencing problems. A network associate has isolated the issue in this network to router B. What action can be preformed to correct the network issue?

Refer to the exhibit. A web browser running on host PC1 sends a request for a web page to the web server with an IP address 192.168.1.254/24. What sequence of steps will follow in order to establish the session before data can be exchanged?

Which prompt is associated with the privileged exec mode?

A user sees the command prompt: Router(config-if)# . What task can be performed at this mode?

Refer to the exhibit. Interface Fa0/0 on router A is generating excessive broadcast traffic. Which LAN segments will affected by the excessive broadcasts?

What is the effect of using the Router# copy running-config startup-config command on a router?

Which option represents a point-to-point logical topology diagram?

The correct answer is last image.

In a network design project, a network designer needs to select a device to provide collision free connections to 40 hosts on the LAN. Which device should be selected?

Which communication tool allows real-time collaboration?

When must a router serial interface be configured with the clock rate command?

Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A?

Refer to the exhibit. What function does router RT_A need to provide to allow Internet access for hosts in this network?

Refer to the exhibit. Host A attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured with the source MAC address 0050.7320.D632 and the destination MAC address 0030.8517.44C4. The packet inside the captured frame h

Which range of port numbers are reserved for services that are commonly used by applications that run on servers?

Which prompt represents the appropriate mode used for the copy running-config startup-config command ?

Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What address should be pinged from this host to confirm that the router interface is operational?

Refer to the exhibit. An employee wants to access the organization intranet from home. Which intermediary device should be used to connect the organization intranet to the Internet to enable this access?

Which OSI layer manages data segments?

Which two types of media can provide bandwidth up to 1 Gb/s? (Choose two.)

13. To enhance security in a network, the network administrator uses these commands:

Router(config)# line console 0

Router(config-line)#password j1mdi2

Router(config-line)# login

What two conclusions are evident from these commands? (Choose two.)

RouterB is configured The Ethernet interface Fa0/0 of RouterA is configured with the use of the commands that are shown. However, a ping from the Fa0/0 interface of RouterA to the Fa0/0 interface of RouterB is unsuccessful. What action should be taken?

Refer to the exhibit. When host A sends a frame addressed for host D, which hosts will receive the frame?

A user enters http://www.cisco.com/web1.htm in the address line of a browser. Which statement is true about this transaction?

A routing issue has occurred in your internetwork. Which of the following type of devices should be examined to isolate this error?

What can the user do from the command prompt, Router(config-line)# ?

Which option shows the PDU that contains the Layer 3 source and destination addressing for a packet?

this is right answer

Refer to the exhibit. The ping 127.0.0.1 command is issued on the local host. What do the ping results indicate?

Which topology divides the collision domain and provides full media bandwidth to the hosts in the network?

this is right answer

A technician is setting up a workgroup for six users and wants to allow users to share files without setting up a server. Which application layer protocol will provide for peer-to-peer file sharing in a workgroup?

Which router component will have contents erased when the command erase startup-config is issued?

Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN message to begin session establishment. What happens next?

Lernen