Baumstamm
BaumStamm
BaumStamm
-
- 1 / 144
-
Lernkarten
3PCC means:
After a premise SIP Server has been identified, this is the message sent by Network SIP Server to Media Gateway:
Authentication of users is a functionality of:
Based on NETANN (RFC 4240) which one is the correct format in the INVITE message?
By MSML configured between SIP Server and Media Server which is the method used to carry MSML information?
Converts SIP to T-Library and vice versa.
- IVR
- Media Gateway
- Media Server
- Communication DN
- VoIP Service DN
- SIP Server
- Extension DN
- Desktop Application
- Resource Manager
- Trunk DN
- TServer
- URS
- CTI Trunk
- SIP Endpoint
- Routing Point
- StatServer
- Network SIP Server
6 = SIP Server
Each SIP-capable endpoint can be used for 3PCC and 1PCC:
Fill matching letters in a table:
SIP Server
Media Server
Network SIP Server
Media Gateway
PSTN
SIP Server
B; E; F; C; A; D
For an inbound call when Geo-location is configured which header in the INVITE message SIP Server is analyzing?
For more than 4000 endpoints Network SIP Server has to be used.
Forwarding and Transfers is a functionality of:
Forwarding SIP requests between other SIP components and proxies (forgets all information/state after it has sent on a request) is a functionality of:
Gateways can load balance between which of the following applications? ( select all that applies)
Genesys SIP Server supports video functionality but not with Genesys Media Server
How can we pass DTMF tones using SIP methods? (select all that applies)
If a password is required during registration, but not provided, which message will be sent by registrar to the registering party?
If an initiator of a 4 participant conference with MCU involved drops the call. The conference will still continue without the dropped party.
If you have 3 SIP Server and 3 Media Server communicating MSML with SIP Server (each SIP Server can use any Media Server). You want each Media Server to support MCU, MOH and recording. How many VoIPService DNs you will need?
If you have 3 SIP Server and 3 Media Server communicating NETANN with SIP Server (each SIP Server can use any Media Server). You want each Media Server to support MCU, MOH and recording. How many VoIPService DNs you will need?
If you have 3 sites in open standard. One site has one MOH and MCU Media Server, second MOH and recording and third MOH and treatment Media Server? The call rate of the whole contact center is 30 Calls/sec. What minimal number of SIP Server and/or Network SIP Server we need to fulfill this requirements?
If you integrate one SIP Server with one Softswitch what is the minimum number of “Switch” objects you have to create in Genesys Administrator?
If you want to do a 3PCC call besides SIP endpoint and SIP Server you also need.
- IVR
- Media Gateway
- Media Server
- Communication DN
- VoIP Service DN
- SIP Server
- Extension DN
- Desktop Application
- Resource Manager
- Trunk DN
- TServer
- URS
- CTI Trunk
- SIP Endpoint
- Routing Point
- StatServer
- Network SIP Server
8 = Desktop Application
If you want to enable SIP Server/Media Server integration using MSML following DN has to be created:
If you want to integrate a third-party Softswitch with Genesys SIP Server, you do this using:
In order to enable incoming calls from a Gateway following DN type has to be created:
In SIP Server integration with Softswitch all endpoints have to register with softswitch.
MCU stands for “Multimedia Control Unit”
Modifying SIP messages for firewall traversal is a functionality of:
MSML stands for “Media Server Markup Language”
Network SIP Server can replace SIP Server but not opposite:
Presence subscription needs to be configured on SIP Server if integrated with a Softswitch
SDP stands for “Session Description Protocol
Setting following options, which answers are correct? (select all that applies)
- Auto-logout-timeout = 10
- Auto-Logout-ready = true
SIP server can be integrated with a Softswitch but also installed as standalone:
SIP Server can be integrated with any third party Media Server supporting NETANN or MSML
SIP Server can transfer calls without the need of Media Server:
SIP Server has built in a softswitch so it can process SIP signaling and RTP packets as well:
SIP Server is processing SIP signaling but not RTP packets:
SIP Server is using SIP Protocol to talk with URS