T1


L. W.
Diese Lernkarten bieten eine grundlegende Einführung in das Luftrecht und deckt Themen wie Flugverfahren, Instrumentenanflüge und Navigationssysteme ab. Sie konzentrieren sich auf wichtige Konzepte wie ILS, MLS, Wetterradar und Standardverfahren für Piloten. Ideal für angehende Piloten und Luftverkehrskontrolleure, die sich mit den grundlegenden Regeln und Techniken der Luftfahrt vertraut machen möchten.
Flashcards
478
Students
8
Language
German
Category
Law
Created / Updated
23.11.2014 / 01.11.2025

Lernkarten

which combination of characteristics gives best screen picture in a primary search radar?

short pulse length and narrow beam

MLS can minimise multipath errors because:

1. the transmission can be interrupted to avoid reflection by stationary objects

2. The transmission can be interrupted to avoid reflection by stationary objects

the MLS frequencies and available channels are:

in the SHF band, 300 kHz frequency separation giving 200 available channels

the scanning beam of the MLS system is called:

time reference scanning beam (TRSB)

PRF Pulse reference Frequency => Range ?

pulse recurrence frequency ==> PRF = 300'000'000 (Range in Meter X 2)

Flying an ILS approach, the middle marker is positioned so as to be passed at xy ft?

at about 200ft AAL ==> indicates the position for the decision for a missed approach during CAT 1 approach

Which range facility associated with the ILS may identifies by a two-letter identification group?

Locator A0A, or A1A or A2A

Which if the following is correct regarding false beams on the ILS glide path?

False beams will only be found above the correct glide path

Concerning the localiser principle of operation in an ILS system the difference in depth modulation (DDM)

teh type of modulation used for the ILS frequency carrier is:

Amplitude modulation

Beam bends in the ILS approach path are:

slight curves that can be followed by large aircraft

Abweichungen Loc und Glideslop: i 1dot?

1. 1 dot localiser = 0,5 Grad

2. 1 dot glideslop = 0, 14 Grad 

=> max deviation below glide is 2,5 dots (on traditionally CDI = half scale) ==> 3,5 grad 

OM how many NM away from threshold 

4 NM

1. the localizer transmitters operate in a frequency band between? und wo?

2. Glidepath 

3. Marker beacon

1. 108 MHz and 111.975 MHz ==> 300 m behind end of rwy 

2. 329,15 - 335 MHz => 300m behind threshold 

3. 75 MHz

 

 

The ILS glide path is normally intercepted between -....... from the rwy threshold 

3-10 NM

MM wo? und ton?

1000 m from threshold a continuous series of alternate dots and dashes, the dashes keyed at the rate of 2 dashes per second, and the dots at the rate of 6 dots per second

OM wo und ton?

4 NM from threshold and 2 dashes per second

Height ausrechen mit glide slope

(3 Grad x Distance in NM x 6080) / 60 = Height

vertical coverage for a 3,3 Glideslop?

0,45 x 3,3 = 1,49 (under edge) 1,75x3,3 = 5,77 (upper edge)

The UHF band is teh assigned frequency band of the:   Localizer?

ILS glide path transmitter ==> Localizer is VHF

ROD mit 3 Gradäer

ROD = ( 3 Grad x GS x 100) / 60

One of the possible disturbance of the ILS signal is scalopping. what is that? 

scalloping causes rapid indicator changes from side to side of the intended approach path with can not ne followed by the aircraft

It is permissible to eliminate from consideration a paerticular sector where a prominent obstacle exists in the visual manoeuvering (circling) are outside the final approach and missed approach area. When this option is excersied, teh published procedure:

During a circling approach (with or wihout prescribed flight track) the maximum allowed airspeed for  a category C aeroplane , in order to remain within the protected airspace is

What are the names of all separate segments that can be part of an instrument approach procedure 

Which of the following approach speed ranges (VAT) is applicable for Cat. B aircraft?

straigh-in-approach is considered to be acceptable for a non-precision approach, if the angle between teh final approach track and the runway centerline is:

When constructing a turning missed approach the pilot reaction time taken into account is:

for precision approaches, the Final Approach Point is set at a specified distance from the threshold of the instrument runway. What is the max. this distance can be?

If a stepdown fix is established on the final approach track, a descent shall be made sp as to:

PANS-OPS means

STAR

Grad, Altitude ==> was sind die standards für alle Berechnungen 

on an altitude of 600m (2000ft) above MSL and a temperature of +15 Grad (ISA)

the transition level 

Objects located beyond the 15 km radius of the aerdorme are normally considered to be obstacles in flight (enroute obstacles) if they exceed .......... in height

A circling approach is: 

in an instrument approach procedure, the segment in which alignment and descent for landing are made is called:

Departure prcedure: basic turns ab wann?

a) climb on the extended runway centerline to 120m (394 ft) before turns

b) at least 90 m (295ft) of obstacle clearance is provided before turns greater than 15 Grad are specified

Étudier