PL080 - Principles of Flight PPL(A)
PPl(A) base
PPl(A) base
-
- 1 / 370
-
Lernkarten
In the conventional solution the height tail consists of:
The coordinate system describing the movement of the aircraft during flight axis OX? Is called:
The coordinate system describing the movement of the aircraft during flight axis OY? Is called:
The coordinate system describing the movement of the aircraft during flight axis OZ? Is called:
In the flight, the pilot set tilts a joystick to the right. Assuming that the aileron deflects by the same angle, following statement will be true:
In a result of aileron going up and down by the same angle will be:
Using of winglets on tips of wings decrease drag:
A boundary layer of an aerofoil is a layer in which:
The value of the coefficient of lift (CL) for the critical angle of attack "AOA" has the maximum value.
The value of the coefficient of drag (Cd) for the critical angle of attack "AOA" has the maximum value.
The internal aerodynamic balance of aileron is executed by:
With increase of altitude an air density:
The Load factor 'n ' during dive is:
The load factor during turn depends from:
Moving of whose devices are not mechanically coupled with moving control surface?
A graph of function of the coeficient of drag Cd = f (AOA) for asymmetric profile is:
A graph of the function Cl = f (Cd) for the symmetric profile is:
It has no symmetry.
A graph of the function Cl = f (AOA) for a symmetric profile is:
Graphs of which functions for the symetric profile are intersecting the center of the coordinate system?
Graphs of which functions for the symetric profile are intersect center of coordinate system?
Dihedral of the wings is used to:
The increase in air temperature at a constant altitude causes:
What are the main elements of the resistance aircraft called skin friction dran?
The principle of continuity of the movement of air flowing through the tunnel with variable cross-section states that:
Apply of aerodynamic balance of controls is designed to:
The ability to maintain the balance and prevent its changes is called:
Ability to change the steady-state flight under the influence of corresponding rudder deflection is called:
The external aerodynamic compensation of control surface takes place by the application of:
The phenomenon of aileron reversal that is:
Reducing of airstream cross- section means:
An aerodynamic twist of wing is characterized itself by:
The geometrical twist of wings is characterized itself by:
Increasing the lift on the wing causes a change in the induced drag:
Increasing the angle of attack alpha > alpha cr causes:
What kind of rule is? "In the tunnel by which an air flows a product of cross-sectional area and an air velocity is constant S * v = const"
What kind of rule is? "In the tunnel by which an air flows, the sum of static and dynamic pressure is constant at every point of the movement"
To describe the movements of aircraft (airplane, helicopter, glider, etc.) in the space system is used three axes. How the vertical axis is marked?
To describe the movements of aircraft (airplane, helicopter, glider, etc.) in the space system iaxes xyz is used. How the longitudinal axis is marked?
To describe the movements of aircraft (airplane, helicopter, glider, etc.) in the space system axes xyz is used. How is the transverse axis marked?
