c2b_default

SAT DA42 FNPT

-

-

35
0.0 (0)
P. L.
Étudier
P. L.
This flashcard set provides an overview of essential procedures and checks for aircraft operations, focusing on navigation, engine management, and system verification. It covers critical aspects such as approach briefings, navigation checks, engine start procedures, and various pre-flight and post-flight checks. Pilots and aviation enthusiasts will find this set particularly useful for understanding and mastering the necessary steps to ensure safe and efficient flight operations.
Cartes-fiches
35
Utilisateurs
4
Langue
Anglais
Catégorie
Code de la route
Niveau
Autres
Créé / Mis à jour
20.05.2017 / 02.07.2025
  • 1  / 35

Cartes-fiches

Engine Start

  1. Power levers   -   IDLE
  2. Strobe- / Position Light   -   ON
  3. Propeller Area   -   CLEAR
  4. Engine Master (L/R)   -   ON
  5. Annunciations / Engine / System   -   Checked
  6. Glow annunciation   -   OFF
  7. Start key   -   START
  8. Oil pressure   -   Checked
  9. Annunciations / Engine / System   -   Checked
  10. Strobe lights   -   OFF

Before Line Up

9.   Pitot Heat   -   ON
10. Annunciations / Engine / System page  -   Checked

Climb Check

  1. Gear   -   UP
  2. Flaps   -   UP
  3. Climb power   -   SET
  4. Altimeters   -   SET / COMPARED
  5. Annunciations / Engine / System   -   CHECKED

Approach Check

  1. Altimeters   -   SET / COMPARED
  2. Fuel selectors   -   ON

Landing Check

  1. Gear   -   DOWN / 3 GREENS
  2. Parking brake / pedals   -   RELEASED / FREE
  3. Flaps APP / LAND   -   SET

After Landing Check

  1. Timer   -   STARTED
  2. Pitot Heat   -   OFF
  3. Transponder   -   GND
  4. Alternate air   -   CLOSED
  5. Flaps   -   UP

Parking Check

  1. Parking Brake   -   LOCKED
  2. Timer   -   CHECKED
  3. ELT   -   CHECKED
  4. Electrical Equipment   -   OFF
  5. Avionic master   -   OFF
  6. Power levers   -   IDLE
  7. Engine Masters (L/R)   -   OFF

Verifie ATC Clearance

(at Take-off Check)

  1. Check navigation status box for next waypoint (if GPS FLP used)
  2. Check initial cleared altitude
  3. Check SID loaded in FLP (if used)
  4. Check Transponder Code
  5. Briefly recheck primary nav aids

----

  1. Next WPT
  2. Cleared ALT
  3. SID
  4. XPDR
  5. Nav Aids

RMI Check

  • Aktuelle Posi ist vor QDM,QDR,Radial oder Course
     
  • Aktuelles HDG fürt zu dieser Standlinie
     
  • Nadelspitze/-ende (RMI) und Deviation Bar (HSI) stehen vor der Standlinie
     
  • RMI und Deviation Bar bewegen sich in Richtung dieser bestimmten Standlinie

QDR-Intercept Wording

  1. Difference of Angle
  2. Interception Angle
  3. Interception HDG

Approach Briefing (Struktur/Trigger)

Approach Briefing for <>:
 

  • Clearance Limit:
     
  • Final Configuration:
     
  • Altitudes:  MSA
                    Intermiediate ALT
                     OM
                    DA
     
  • Missed Approach:
     
  • FGS:
     
  • Landing Distance available:
     
  • Final Nav aids:

 

Étudier